S&A CW-3000 Series Industrial Water Chiller | Pre Sale
Estimate shipping
Description
S&A CW-3000 Series is a professional water cooler designed with an international and advanced thermolysis cooling system, making it suitable for small machinery that requires water-cooled cooling devices.
Remarks: The CW-3000 air cooled water chiller is equipped with high-speed fans that quickly take away heat through water recirculation. However, the water temperature is dependent on the ambient temperature and cannot be manually adjusted.
It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.)
Connection diagram between water chiller and laser machine
Water outlet of the water tank connects to water inlet of the laser machine while water inlet of the water tank connects to water outlet of the laser machine.Aviation connector of the water tank connects to the aviation connector of the laser machine.
Parameter
|
MODEL |
CW-3000TG |
CW-3000DG |
CW-3000TK |
CW-3000DK |
|
Voltage |
AC 1P 220V |
AC 1P 110V |
AC 1P 220V |
AC 1P 110V |
|
Frequency |
50/60Hz |
50/60Hz |
50/60Hz |
50/60Hz |
|
Current |
0.45A |
0.9A |
0.5A |
1.0A |
|
Machine Power |
0.10kW |
0.10kW |
0.11kW |
0.11kW |
|
Radiating Capacity |
50W/℃ |
50W/℃ |
50W/℃ |
50W/℃ |
|
Max.lift |
10M |
70M |
||
|
Max.flow |
10L/min |
2L/min |
||
|
N.W. |
9.5Kgs |
12Kgs |
||
|
G.W. |
12Kgs |
14.5Kgs |
||
|
Protection |
Flow alarm |
|||
|
Tank capacity |
8.5L |
|||
|
Inlet and outlet |
OD 10mm barbed connector |
8mm fast connector |
||
|
Dimension |
49×27×38cm （L×W×H） |
|||
|
Package dimension |
59×39×48cm （L×W×H） |
|||
Note : the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.
Features
1.Specific disconnection alarm securing protection.
2.High cost performance, low failure rate.
3.Radiating Capacity is 50W / °C.
4.Forces circulation, 9L cooling tank capacity.
5.lt can extend the using life of laser tube and ensure the engraving effect better.
6.Comprehensive reference to the international radiator - type cooling system.
7.Small thermolysis water cooler.
8.With completed water flow and over high temperature alarm functions.
9.Professional forced air - cooled radiator.
10.CW-3000 Laser Water Chiller is suitable for small water cooling device.
11.Provide stable working conditions for laser devices.
12.High heat dissipating capacity and not easy to be blocked.
Contour And Parts Introduction
Independent production of sheet metal and heat exchanger . 9L cooling tank, fast cooling.
Adopt IPG fiber laser for welding and cutting sheet metal, adopt minimize risks of water and refrigerant leakage and improve quality
Digital temperature display
The digital temperature display is able to indicate water temperature and alarm codes.
Ease of moving and water filling.
The firm handle can help move the water chillers easily.
Inlet and outlet connector equipped. Multiple alarm protection.
The laser will stop working once it receives alarm signal from the water chiller for protection purpose.
High speed fan
The high speed fan is installed to ensure high cooling performance.
Easy water draining
It is suggested to replace the cooling water(distilled water or purified water as cooling water) every 3 to 6 months.
FLOW ALARM AND OUTPUT PORTS
In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-3000series water cooler possess a low flow alarm protection.
(1) Flow alarm output ports and the wiring diagram
(2) ALARM DESCRIPTION
Causes of the cooling water circulation alarm and the working condition table
Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V.
Maintenance
1.To ensure good heat dissipating, please open the lid to clean thedirt after the cooler used in long-term.
2.Users in cold area should use noncorrosive antifreeze fluid.
Water Tank Water Exchange Method and Frequency
To exchange the water in the tank, drain the waste water out of the tank using the drain outlet, and refill the tank with clean water through the filling hole.
The frequency of water exchange is crucial for maintaining the quality of the circulating water and maximizing the service life of the laser tube. It is recommended to exchange the purified water once a month and the running water twice a month. It is also advised to use purified water for optimal performance.
Packing list
|
Machine Dimension |
49cm x 27cm x 38cm (19.3" x 10.6" x 15") |
|
Machine Weight |
8.7Kgs(19.2lb) |
|
Package |
Carton box |
|
Packing Size |
55cm x 34cm x 43cm (23.2" x 15.4" x 18.9") |
|
Gross Weight |
11 Kgs(24.3lb) |
Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance!
Installation
Cautions & Troubleshooting
Flash Sale - Lowest Prices & Discounted Prices
Please View FAQ Here
You are welcome to contact us anytime via our live chat or info@mcwlaser.com
What is a pre-order item?
Pre-order is a production and reservation program launched by MCWlaser for S&A chillers.
During the campaign period, you can reserve your preferred model in advance and enjoy an exclusive pre-order discount. All pre-order orders will be scheduled for production according to the factory production plan after the order is placed.
When will the pre-order products be shipped?
The production schedule for this pre-order batch is expected to start from early to late-August 2026.
After production is completed and quality inspection is passed, the products will be shipped in batches to our overseas warehouses and then delivered according to your location.
The estimated overall process takes approximately 2-3 months.
The actual delivery time may be affected by:
Production schedule
Quality inspection
Overseas warehouse receiving process
International shipping
Once the products arrive at the warehouse, MCWlaser will arrange shipment promptly and provide tracking information.
What is the pre-order discount policy?
Customers participating in this campaign can enjoy an exclusive pre-order discount.
Campaign period: August 3, 2026 - August 31, 2026
After the campaign ends, products will return to their regular prices.
Pre-order discounts cannot be combined with other promotions.
Can I modify or cancel my pre-order?
If you need to modify or cancel your order, please contact us as soon as possible.
Before production is scheduled, we will assist with your request based on the actual order status.
After production starts or the order is shipped, the order will be handled according to MCWlaser’s standard return and exchange policy.
Where will the pre-order products be shipped from?
Products will be shipped from the following overseas warehouses:
US Warehouse
EU Warehouse
AU Warehouse
Benefits of overseas warehouse delivery:
No additional import duties or VAT
Shipping costs are included in the product price
The price shown at checkout is the final amount you pay
What after-sales support is included?
With every MCWlaser S&A chiller purchase, you will receive:
2-year official warranty
Professional technical support
Complete after-sales assistance
Our team is always available to help ensure your chiller operates reliably and efficiently.
Product and Service Support
